The 2016 Mack CXU613 is a Class 8 conventional truck, known for its robust construction and reliable performance in vocational and long-haul applications. As part of Mack's long-standing legacy in heavy-duty trucking, the CXU613 line has been a consistent performer. While specific trims can vary widely based on vocational needs, the CXU613 is primarily recognized for its powerful engine options and durable chassis. Its popularity stems from its reputation for dependability and a strong, no-nonsense design that prioritizes functionality and driver comfort.
The Good
The 2016 Mack CXU613 offers exceptional durability and legendary reliability, appealing to practical buyers focused on uptime and longevity. Its powerful performance capabilities ensure it can handle demanding tasks, while the comfortable cabin provides a welcome environment for drivers. This truck represents a solid investment with enduring value.
The Bad
While generally robust, potential buyers should be aware of common issues like potential EGR system failures and occasional electrical gremlins. Older models may also exhibit wear and tear on suspension components. Thorough pre-purchase inspections are crucial.
2016 Mack CXU613: Quick Overview
- Engine Options: The 2016 Mack CXU613 primarily features Mack's proprietary MP series engines. Common options include the Mack MP7, MP8, and potentially the MP10. These are designed for heavy-duty applications and varying power demands.
- Horsepower: Horsepower ratings typically range from around 300 hp for the MP7 up to 505 hp or more for the MP8 and MP10 engines, depending on the specific configuration and tuning for the intended application.
- Fuel Economy: Fuel economy for heavy-duty trucks like the CXU613 is highly dependent on engine choice, load, terrain, driving habits, and axle ratios. Official EPA ratings are not typically provided for these types of vehicles as they are primarily workhorses. Expect figures to be in the range of 5-7 miles per gallon (MPG) under optimal conditions, but this can fluctuate significantly.
- 0-60 Times: 0-60 mph times are not a relevant metric for Class 8 trucks and are not tested or published. Their focus is on hauling capacity and sustained power, not rapid acceleration.
- Towing Capacity: The towing capacity of the 2016 Mack CXU613 is substantial and designed for heavy loads. It is typically rated for Gross Combination Weight Ratings (GCWR) ranging from 80,000 lbs up to 140,000 lbs or more, depending on the specific chassis configuration, axle setup, and engine power. This makes it suitable for hauling large trailers, heavy equipment, and long-haul freight.
- Trim-Level Features: The CXU613 is a truck chassis, and specific "trims" are less about luxury features and more about vocational configurations. Key aspects that differentiate them include:
- Chassis Wheelbases: Available in various wheelbases to suit different trailer lengths and turning radius requirements.
- Axle Configurations: Options for single, tandem, or even tridem rear axles to distribute weight and improve traction.
- Suspension Systems: Various suspension types (e.g., leaf spring, air ride) are available to optimize ride comfort and load-carrying capability.
- Cab Configurations: Typically offered in day cabs (for local routes) or various sleeper configurations (for long-haul) with different bunk sizes.
- Interior Appointments: While work-focused, interiors can range from basic utilitarian setups to more comfortable driver-focused environments with upgraded seating, infotainment options, and driver amenities.
- Braking Systems: Different braking options, including air brakes, are standard for this class of vehicle.
- Chassis Wheelbases: Available in various wheelbases to suit different trailer lengths and turning radius requirements.
2016 Mack CXU613 Specifications
Vehicle Information
| Year | 2016 |
| Make | Mack |
| Model | CXU613 |
| Trim | - |
| Style | - |
| Type | Truck |
| Category | Heavy Truck Vehicle) |
Manufacturing Details
| Made In | United States |
| Manufacturing City | MACUNGIE |
Dimensions
| Doors | - |
| Curb Weight | - |
| Gross Vehicle Weight Rating | 330001 pounds |
| Overall Height | - |
| Overall Length | - |
| Overall Width | - |
| Wheelbase Length | - |
| Standard Seating | - |
Engine & Performance
| Engine | 12.7L I6 |
| Engine Size | 12.7L |
| Engine Cylinders | 6 |
| Transmission | Automatic 10-Speed |
| Transmission Type | Automatic |
| Transmission Speeds | 10-Speed |
| Drivetrain | - |
Additional Features
| Anti-Brake System | - |
| Steering Type | - |
Pricing
| Manufacturer Suggested Retail Price (MSRP) | - |
| Invoice Price | - |
| Delivery Charges | - |
Vehicle History Report
Vehicle
Specifications
Specifications
Ownership
History
History
All History
Events
Events
NMVTIS Title
History Check
History Check
Salvage/Rebuilt
Check
Check
Accident
Check
Check
Theft
Check
Check
Open Lien
Check
Check
Past Sale
Listings
Listings
Safety
Recalls
Recalls
Odometer
Check
Check
Market Price
Analysis
Analysis
What Problems Does the 2016 Mack CXU613 Have?
The 2016 Mack CXU613, like many heavy-duty trucks, can experience issues that are often related to its complex powertrain and emissions systems. One frequently reported concern for Mack trucks of this era, including the CXU613, revolves around the Exhaust Gas Recirculation (EGR) system. Failures in the EGR cooler or valve can lead to reduced engine performance, increased soot buildup, and potentially engine shutdown. These issues can be costly to repair and often require significant diagnostic time.
Another area to watch for is the Diesel Particulate Filter (DPF) system. While essential for emissions control, these filters can become clogged over time, requiring regeneration cycles or cleaning. If not properly maintained, DPF issues can lead to limp-mode operation and expensive replacements.
Electrical system glitches are also not uncommon in heavy-duty trucks. Owners have reported issues with sensors, wiring harnesses, and the engine control module (ECM). These can manifest as intermittent warning lights, erratic gauge readings, or starting problems. Diagnosing these can be challenging and time-consuming.
While specific recalls for the 2016 model year are best checked via official NHTSA databases using the VIN, common recall areas for Mack trucks of this general period might include potential issues with braking systems, steering components, or certain electrical connections that could pose a safety risk. It's always recommended to verify any outstanding recalls for a specific vehicle.
Long-term reliability is generally strong for Mack trucks due to their robust construction, but maintenance is paramount. Neglecting routine oil changes, fluid checks, and filter replacements can exacerbate many potential problems. For example, using poor quality oil or extending oil change intervals beyond recommendations can accelerate wear on engine components and turbochargers, leading to premature failures.
Regarding model year specific issues, while the 2016 CXU613 is a solid performer, slight variations in component suppliers or minor design tweaks between years can sometimes lead to different common problems. However, the core issues related to the powertrain and emissions systems tend to be consistent across several model years for many heavy-duty manufacturers. Focusing on diligent maintenance and addressing any early warning signs promptly are key to ensuring the long-term reliability of a 2016 Mack CXU613.
Another area to watch for is the Diesel Particulate Filter (DPF) system. While essential for emissions control, these filters can become clogged over time, requiring regeneration cycles or cleaning. If not properly maintained, DPF issues can lead to limp-mode operation and expensive replacements.
Electrical system glitches are also not uncommon in heavy-duty trucks. Owners have reported issues with sensors, wiring harnesses, and the engine control module (ECM). These can manifest as intermittent warning lights, erratic gauge readings, or starting problems. Diagnosing these can be challenging and time-consuming.
While specific recalls for the 2016 model year are best checked via official NHTSA databases using the VIN, common recall areas for Mack trucks of this general period might include potential issues with braking systems, steering components, or certain electrical connections that could pose a safety risk. It's always recommended to verify any outstanding recalls for a specific vehicle.
Long-term reliability is generally strong for Mack trucks due to their robust construction, but maintenance is paramount. Neglecting routine oil changes, fluid checks, and filter replacements can exacerbate many potential problems. For example, using poor quality oil or extending oil change intervals beyond recommendations can accelerate wear on engine components and turbochargers, leading to premature failures.
Regarding model year specific issues, while the 2016 CXU613 is a solid performer, slight variations in component suppliers or minor design tweaks between years can sometimes lead to different common problems. However, the core issues related to the powertrain and emissions systems tend to be consistent across several model years for many heavy-duty manufacturers. Focusing on diligent maintenance and addressing any early warning signs promptly are key to ensuring the long-term reliability of a 2016 Mack CXU613.
How long will the 2016 Mack CXU613 last?
The 2016 Mack CXU613 is built for the long haul and can achieve well over 1 million miles if properly maintained. Owner data and typical maintenance habits suggest that these trucks are capable of extensive service lives. Trucks used for long-haul freight, with consistent maintenance, often see 7-10 years or more of primary service before requiring major overhauls.
Long-term durability is a hallmark of the Mack brand, with strong chassis and robust powertrains. Weaknesses that can emerge over time often stem from the complexity of modern emissions systems (EGR, DPF) and cumulative wear on components like the turbocharger, fuel injectors, and drivetrain. Regular fluid changes, diligent filter replacements, and prompt attention to any warning lights or performance anomalies are critical to maximizing its lifespan and avoiding costly repairs. Trucks used in severe vocational applications (construction, refuse) may accumulate mileage faster and experience more wear and tear on suspension and chassis components, potentially reducing their overall service life compared to highway trucks.
Long-term durability is a hallmark of the Mack brand, with strong chassis and robust powertrains. Weaknesses that can emerge over time often stem from the complexity of modern emissions systems (EGR, DPF) and cumulative wear on components like the turbocharger, fuel injectors, and drivetrain. Regular fluid changes, diligent filter replacements, and prompt attention to any warning lights or performance anomalies are critical to maximizing its lifespan and avoiding costly repairs. Trucks used in severe vocational applications (construction, refuse) may accumulate mileage faster and experience more wear and tear on suspension and chassis components, potentially reducing their overall service life compared to highway trucks.
What Technology & Safety Features are Included?
The 2016 Mack CXU613 prioritizes functionality and driver focus over cutting-edge infotainment, which is typical for heavy-duty vocational and long-haul trucks. Built-in technology is geared towards operational efficiency and driver comfort rather than the advanced consumer-grade features found in passenger vehicles.
Standard Technology & Safety:
Optional Features & Considerations:
While specific options can vary widely based on the truck's intended use, buyers could opt for:
Crash-Test Ratings:
Dedicated crash-test ratings from organizations like the NHTSA or IIHS for Class 8 trucks like the 2016 Mack CXU613 are generally not available in the same format as for passenger cars. The sheer size and weight of these vehicles mean that occupant protection is primarily achieved through robust structural design, advanced braking systems, and driver training rather than standardized impact tests. The design philosophy emphasizes durability and the ability to withstand operational stresses, with safety features focused on preventing accidents through visibility and control.
Standard Technology & Safety:
- Driver Information Display: A central dashboard display provides essential vehicle information, including engine diagnostics, fuel levels, speed, and trip data.
- Advanced Diagnostics: The ECM (Engine Control Module) provides real-time engine monitoring and diagnostic capabilities, crucial for proactive maintenance.
- Braking Systems: Robust air brake systems are standard, designed for the demanding requirements of heavy loads. Anti-lock Braking Systems (ABS) are also typically included for enhanced safety.
- Visibility: Large, multi-pane mirrors provide excellent visibility around the vehicle, essential for safe maneuvering. Powerful headlights are standard for nighttime operations.
- Structural Integrity: Mack trucks are known for their robust chassis and cab construction, designed to withstand significant stress and provide a degree of protection in the event of an incident.
Optional Features & Considerations:
While specific options can vary widely based on the truck's intended use, buyers could opt for:
- Enhanced Infotainment: Some models might have options for aftermarket or factory-integrated radio systems with basic Bluetooth connectivity or USB ports, though advanced touchscreens are rare.
- Navigation Systems: GPS navigation can be integrated, particularly for long-haul applications.
- Driver Comfort Features: Options might include upgraded seating materials, auxiliary heating and air conditioning for the sleeper compartment, and additional power outlets.
- Driver Assistance (Limited): Advanced driver-assistance systems like lane departure warning or adaptive cruise control were not widely standard on vocational trucks of this era. The focus was more on driver awareness through mirrors and robust systems.
- Telematics: Fleet management systems and telematics can be integrated to monitor vehicle performance, location, and driver behavior, though this is often a fleet-level addition.
Crash-Test Ratings:
Dedicated crash-test ratings from organizations like the NHTSA or IIHS for Class 8 trucks like the 2016 Mack CXU613 are generally not available in the same format as for passenger cars. The sheer size and weight of these vehicles mean that occupant protection is primarily achieved through robust structural design, advanced braking systems, and driver training rather than standardized impact tests. The design philosophy emphasizes durability and the ability to withstand operational stresses, with safety features focused on preventing accidents through visibility and control.
What Colors Options are Available?
We’re working on this section!
In the meantime, feel free to explore the other sections for more content.
In the meantime, feel free to explore the other sections for more content.
2016 Mack CXU613 Prices and Market Value
When new, the 2016 Mack CXU613 would have had a base price that could range significantly depending on configuration, engine choice, and vocational outfitting, but typically started in the $100,000 to $150,000 range, easily exceeding $200,000 for highly specialized or premium sleeper configurations.
Currently, the used market prices for a 2016 Mack CXU613 vary widely based on mileage, condition, engine hours, maintenance history, and specific vocational equipment. Expect prices to typically fall between $40,000 and $80,000 for well-maintained units, with exceptional examples or rare configurations commanding higher figures.
Depreciation on heavy-duty trucks is less steep than on light-duty vehicles, especially if they are well-maintained and have a strong service history. Factors affecting resale value include the condition of the powertrain (engine and transmission), the integrity of the chassis and suspension, the functionality of specialized equipment (e.g., hydraulics, fifth wheels), and overall cosmetic appearance. Trucks with lower mileage and comprehensive maintenance records will always hold their value better.
Currently, the used market prices for a 2016 Mack CXU613 vary widely based on mileage, condition, engine hours, maintenance history, and specific vocational equipment. Expect prices to typically fall between $40,000 and $80,000 for well-maintained units, with exceptional examples or rare configurations commanding higher figures.
Depreciation on heavy-duty trucks is less steep than on light-duty vehicles, especially if they are well-maintained and have a strong service history. Factors affecting resale value include the condition of the powertrain (engine and transmission), the integrity of the chassis and suspension, the functionality of specialized equipment (e.g., hydraulics, fifth wheels), and overall cosmetic appearance. Trucks with lower mileage and comprehensive maintenance records will always hold their value better.
2016 Mack CXU613 Cost of Ownership
Owning a 2016 Mack CXU613 is a significant investment, and costs are generally substantial rather than economical. Insurance premiums will be high, reflecting the vehicle's value and the risks associated with commercial trucking. Fuel costs are a major ongoing expense, with MPG highly dependent on engine and load, but generally in the 5-7 MPG range.
Maintenance is crucial and ongoing, including regular oil changes, filter replacements, and tire rotations, which can add up significantly. Repair costs for heavy-duty components, especially powertrain or emissions system issues, can be very high. Long-term ownership costs are considerable due to these factors, but the vehicle's durability and earning potential can offset these if managed effectively.
Maintenance is crucial and ongoing, including regular oil changes, filter replacements, and tire rotations, which can add up significantly. Repair costs for heavy-duty components, especially powertrain or emissions system issues, can be very high. Long-term ownership costs are considerable due to these factors, but the vehicle's durability and earning potential can offset these if managed effectively.
2016 Mack CXU613 Fuel Efficiency
Fuel Type
Diesel
Fuel Capacity
-
City Mileage
-
Highway Mileage
-
2016 Mack CXU613 Warranty
Basic
Original warranty
0 months / No data
Estimated remaining
Expired
Powertrain
Original warranty
0 months / No data
Estimated remaining
Expired
Rust
Original warranty
0 months / No data
Estimated remaining
Expired
2016 Mack CXU613 Insurance
Insurance for a 2016 Mack CXU613 is moderately priced, reflecting its status as a Truck with strong safety ratings and
reasonable repair costs.
reasonable repair costs.
How Does the 2016 Mack CXU613 Compare to Other Truck?
The 2016 Mack CXU613 competes in the highly contested Class 8 heavy-duty truck market against formidable rivals such as Peterbilt (e.g., Model 579), Kenworth (e.g., T680), Volvo Trucks (e.g., VNL), Freightliner (e.g., Cascadia), and International (e.g., ProStar).
Performance: Mack trucks, including the CXU613, are renowned for their robust powertrains, particularly their proprietary MP series engines. They offer strong torque and power, making them highly capable for demanding hauling and vocational applications. Rivals like Peterbilt and Kenworth also offer excellent performance, often with comparable engine options and towing capacities, though specific engine choices and tuning can vary. Volvo and Freightliner are also strong contenders with powerful and efficient engine lines.
Features: In terms of features, the CXU613 leans towards functional durability over luxury. While it offers necessary driver amenities and safety features, rivals like the Kenworth T680 or Volvo VNL might offer more advanced integrated technology, improved aerodynamics for fuel efficiency, and a wider array of optional comfort and convenience features in their premium long-haul configurations. For vocational applications, the CXU613's ruggedness is often its key feature.
Reliability: Mack has a long-standing reputation for building reliable, tough trucks. The CXU613 is generally considered a dependable workhorse. However, specific reliability can depend heavily on the chosen powertrain and how well the truck is maintained. Competitors like Kenworth and Peterbilt also have strong reliability records, often perceived as benchmarks in the industry. Volvo and Freightliner offer competitive reliability, with ongoing advancements in their respective platforms.
Price: The pricing of a new 2016 CXU613 would have been competitive within the Class 8 segment, generally aligning with its peers. On the used market, prices are driven by condition, mileage, and configuration.
Alternatives:
Performance: Mack trucks, including the CXU613, are renowned for their robust powertrains, particularly their proprietary MP series engines. They offer strong torque and power, making them highly capable for demanding hauling and vocational applications. Rivals like Peterbilt and Kenworth also offer excellent performance, often with comparable engine options and towing capacities, though specific engine choices and tuning can vary. Volvo and Freightliner are also strong contenders with powerful and efficient engine lines.
Features: In terms of features, the CXU613 leans towards functional durability over luxury. While it offers necessary driver amenities and safety features, rivals like the Kenworth T680 or Volvo VNL might offer more advanced integrated technology, improved aerodynamics for fuel efficiency, and a wider array of optional comfort and convenience features in their premium long-haul configurations. For vocational applications, the CXU613's ruggedness is often its key feature.
Reliability: Mack has a long-standing reputation for building reliable, tough trucks. The CXU613 is generally considered a dependable workhorse. However, specific reliability can depend heavily on the chosen powertrain and how well the truck is maintained. Competitors like Kenworth and Peterbilt also have strong reliability records, often perceived as benchmarks in the industry. Volvo and Freightliner offer competitive reliability, with ongoing advancements in their respective platforms.
Price: The pricing of a new 2016 CXU613 would have been competitive within the Class 8 segment, generally aligning with its peers. On the used market, prices are driven by condition, mileage, and configuration.
Alternatives:
- Similar Alternatives: For those seeking a similarly rugged and dependable truck, consider the Peterbilt 389 (for a classic, robust feel) or a Kenworth T880 (for a versatile vocational platform). These offer comparable build quality and performance.
- Potentially Better Alternatives (depending on needs): If fuel efficiency and advanced technology for long-haul trucking are paramount, the Kenworth T680 or Volvo VNL series are often considered leaders in aerodynamics and driver comfort features. For pure vocational prowess and maneuverability, depending on the specific task, other specialized chassis might be considered.
Final Verdict: Is the 2016 Mack CXU613 a Good Truck?
The 2016 Mack CXU613 is ideally suited for owner-operators and fleet managers seeking a durable, no-nonsense truck built for demanding vocational tasks or long-haul freight where reliability and brute strength are paramount. It is worth buying if acquired at a fair market price, especially as a used vehicle, given its proven longevity.
It is most advisable to purchase a used 2016 CXU613 with a comprehensive maintenance history and lower mileage relative to its age. Buyers should prioritize trucks that have been well-cared for, ideally from highway operations rather than severe vocational use, if seeking longevity with fewer immediate repair concerns. Specific trims should be chosen based on intended application, whether a day cab for local work or a sleeper for over-the-road. Thorough pre-purchase inspections are essential to identify any potential issues with the powertrain or emissions systems.
It is most advisable to purchase a used 2016 CXU613 with a comprehensive maintenance history and lower mileage relative to its age. Buyers should prioritize trucks that have been well-cared for, ideally from highway operations rather than severe vocational use, if seeking longevity with fewer immediate repair concerns. Specific trims should be chosen based on intended application, whether a day cab for local work or a sleeper for over-the-road. Thorough pre-purchase inspections are essential to identify any potential issues with the powertrain or emissions systems.
Cathleen V
Cathleen is an exceptional freelance writer covering hot topics in the automotive world from a gearhead's perspective. Her articles delve into various aspects of automotive technology and history, offering readers detailed insights into engine performance, reliability, and maintenance. Through her engaging and informative writing, Cathleen provides valuable information to automotive enthusiasts and consumers alike, helping them make informed decisions about vehicle maintenance and purchases.